View RMDVB1-9PH1K_609054.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Micro-D Plastic Shell - .050" Contact Spacing
Microminiature Rectangular Connectors with MICRO-Pin Contacts on .050 (1.27) centers. MICRO-D microminiature rack/panel connectors are used in applications requiring highly reliable, extremely small, lightweight connectors. These connectors are available in 2 insulator materials, 2 mounting variations, 7 shell sizes accommodating from 9 to 51 contacts and a special arrangement of 5 micro contacts and 2 coaxials. The insulator materials listed give the MICRO-D connector wide versatility in most applications required by industry. ITT can also terminate a wide variety of stranded or solid wire directly to MICRO-D contacts, which is often desirable in high density arrangements. MICRO-D connectors can also be custom harnessed to meet any customer requirement of single or multiple connectors. Pigtail lead and harness description must be given by the customer. A typical description would be: .5" #25 AWG, gold plated copper leads or 18" of #26 yellow, Teflon-insulated, Type E wire. Shown below are various methods of termination. Consult customer service for any routine or complex harnessing of MICRO-D connectors.
MD**
* Glass-filled diallyl phthalate thermoset material used in high temperature applications that is immune to cleaning solvents. It also has excellent dielectric properties. Temperature range: -65F to +300F (-55C to +149C). * Glass-filled polyester thermoplastic that is not affected by cleaning solvents and exhibits excellent dielectric properties. Temperature range: -55F to +257F (-65C to +125C).
Specifications
MATERIALS AND FINISHES Shell/Insulator (One Piece) MD/MDB: Glass-filled thermoset plastic MDV/MDVB: Thermoplastic Contacts - Copper alloy, gold plate Wire Size Contact Termination ELECTRICAL DATA No of Contacts - 9 to 51: (1 arrangement of 5 contacts and 2 coaxials - for screw mount only) - RG-178/U (Not available for MD clip mount) - #24 thru #32 AWG - Multi-indent crimp
Coaxial Cable
MECHANICAL FEATURES Size or Length Coupling Polarization Contact Spacing Centers Shell Styles - 7 sizes - Friction/jackscrews - Keystone-shaped shells -.050 (1.27mm) - Plug and receptacle
Consult factory for availabilty.
How to Order
PCB ordering information - page 30 RoHS COMPLIANCE SERIES-INSULATOR STYLE-MATERIAL CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE SERIES-INSULATOR STYLE-MATERIAL MDB - Screw mounting-Diallyl phthalate MDVB - Screw mounting-Polyester CONTACT SPACING 1 - .050 (1.27) centers CONTACT ARRANGEMENT 9-15-21-25-31-37-51. See page 9 CONTACT TYPE P - Pin S - Socket TERMINATION TYPE H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. TERMINATION CODE See page 79 and 81 for additional codes (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper. LOCKING HARDWARE (SCREW MOUNTING ONLY) P - Jackpost K - Jackscrew-standard L - Jackscrew-low profile F - Float mount M - Military specification hardware, see page 13.
No designator - No hardware - standard mounting .091 (2.31) hole diameter
R
MD**
1-
9
P
H
001
P
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
28
Micro-D Plastic Shell - .050" Contact Spacing
Standard Wire Termination Codes
MDB/MDVB
The following termination codes are listed for your information. For additional codes please refer to Appendix on page 79 and 81. All wire lengths are minimum. Harness Type (H) Solid Uninsulated Type (L)
#26 AWG per MIL-W-16878 Type E Teflon, stranded. #25 AWG Gold Plated Copper
Length 3 (76.2) 6 (152.4) 8 (203.2) 10 (254.0) 12 (304.8) 18 (457.2) 20 (508.0) 24 (609.6) 30 (762.0) 36 (914.4) 48 (1219.2) 72 (1828.8) 120 (3048.0) * Cavity #1 black
All Yellow H020 H019 H026 H029 H028 H001 H038 H009 H010 H011 H013 H017 H042
Color Coded* H027 H016 H034 H025 H002 H003 H023 H004 H005 H006 H048 H046 H041
Termination Code L61 L56 L57 L39 L58 L1 L14 L2 L7 L6 L16 L10
Length .125 (3.18) .150 (3.81) .190 (4.83) .250 (6.35) .375 (9.52) .500 (12.70) .750 (19.05) 1.000 (25.40) 1.500 (38.10) 2.000 (50.80) 2.500 (63.50) 3.000 (76.20)
With Screw Mounting Holes (Conforms to MIL-DTL-83513)
MDB Glass-filled Diallyl Phthalate Plastic Insulator
B .304 (7.72) MAX. .204 (5.18) MAX.
MDVB
Glass-filled Polyester Plastic Insulator
.110 (2.79) MAX. D TWO MTG. HOLES .091 .003 (2.31 0.08) F
.395 (10.03) MAX.
R
C
.100 (2.54) MAX.
Solder Pot
B .285 (7.24) MAX. .185 (4.70) MAX.
.200 (5.08) MAX.
+
A F
+
E
.154 (3.91) MAX. D
.375 (9.92) MAX.
+
C .100 (2.54) MAX. .200 (5.08) MAX. A
+
E
Solder Pot
Part Number by Shell Size MDB1-9P** MDVB1-9P** MDB1-9S** MDVB1-9S** MDB1-15P** MDVB1-15p** MDB1-15S** MDVB1-15S** MDB1-21P** MDVB1-21P** MDB1-21S** MDVB1-21S** MDB1-25P** MDVB1-25P** MDB1-25S** MDVB1-25S** MDB1-31P** MDVB1-31P** MDB1-31S** MDVB1-31S** MDB1-37P** MDVB1-37P** MDB1-37S** MDVB1-37S** MDB1-51P** MDVB1-51P** MDB1-51S** MDVB1-51S**
A Max. .788 (20.02) .788 (20.02) .938 (23.82) .938 (23.82) 1.088 (27.64) 1.088 (27.64) 1.188 (30.18) 1.188 (30.18) 1.338 (33.98) 1.338 (33.98) 1.488 (37.80) 1.488 (37.80) 1.438 (36.52) 1.438 (36.52)
B Max. .292 (7.42) .380 (9.65) .442 (11.23) .530 (13.46) .592 (15.04) .680 (17.27) .692 (17.58) .780 (19.81) .842 (21.39) .930 (23.62) .992 (25.20) 1.080 (27.43) .942 (23.93) 1.030 (26.16)
C Max. .408 (10.36) .408 (10.36) .588 (14.17) .588 (14.17) .708 (17.98) .708 (17.98) .808 (20.56) .808 (20.56) .958 (24.33) .958 (24.33) 1.108 (28.14) 1.108 (28.14) 1.058 (26.87) 1.058 (26.87)
D Max. .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .173 (4.39) .220 (5.59) .220 (5.59)
E Max. .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .260 (6.60) .260 (6.60)
F .005 .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (38.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86)
Avg. Weight*** 5% (oz.) 5% (gm.) .026 (0.73) .025 (0.70) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .080 (2.30) .073 (2.10) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.64)
** Add lead type and length, see Part Number Explanation. *** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
29
Micro-D Plastic Shell - .050" Contact Spacing
MD*B-PCB connectors use standard MD*B all plastic shells and are designed for use with flex circuitry, printed circuit and multi-layer boards. They are easily mounted and soldered and provide high density/high reliability in board-to-board and board-to-cable applications. While being similar to the MDM-PCB connectors, the MD*B-PCB connectors are all plastic, extremely small, and lightweight yet rugged enough for use in the most demanding applications. MD*B-PCB connectors are available in seven shell sizes with 9 to 51 contacts in the popular 90 narrow profile PCB termination, with a variety of tail lengths for varying board thickness. Jackpost mounting for use with locking hardware is also available. If the connectors shown in the catalog do not meet the requirements of your applications, a special shape, size or layout using the basic all plastic shell can be made available. For further technical and applications information, contact customer service.
MD*B-PCB
How to Order
R RoHS COMPLIANCE SERIES CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE HARDWARE TERMINATION TAIL LENGTH MODIFICATION CODES (Consult Factory) C CONNECTOR SERIES M MDVB, MDB CONNECTOR ARRANGEMENT 9, 15, 21, 25, 31, 51 C CONTACT TYPE S = Socket P = Pin T TERMINATION TYPE CBR = 90 Narrow Profile PCB Terminations H HARDWARE P = Jackpost M7 = Jackposts, M635135-07 No Letter = Less Hardware TERMINATION TAIL LENGTH CODES NONE - .109 (2.77) 0.15 (0.38) Standard L61 - .125 (3.18) L66 - .150 (3.81) L57 - .190 (4.83) - .250 (6.35) L39 L58 - .375 (9.52) MD*B - 37 S CBR * L39 ***
T
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
30
Micro-D Plastic Shell - .050" Contact Spacing
CBR Series (90 Mounting Narrow Profile)
LAST CAV .109 + .015 _ _ (3.77 + 0.38)
+
MD*B-PCB
A C
+
JACKPOST 2-56 UNC-2B TYP.
E
D
B
CAV. #1
G F
H
.186 (4.72) PLUG .199 (5.05) RECEPTACLE
*
* FOR 31: 1.085 (27.56) MAX. FOR 37: 1.185 (30.10) MAX. FOR 51: 1.225 (31.12) MAX.
F
G
H
9-15-21-25 VIEW
_ .096 + .005 (2.44 + 0.31) DIA. TYP _
PCB Termination Arrangements (Viewed from bottom of connector, on PCB solder side.) Indentification number shown for plug connector, use reverse order for socket connector.
.083 (2.11)
5 4 2 1 15 9 8 3 7 6
.108 (2.73)
7 8 14 6 5
.100 (2.54) TYP.
4 12 13 11 3 10 2 1 9
.020 (0.51)
.083 (2.11)
11 21
.083 (2.11)
10 9 20 19 8 7 18 6 17 16 5 4 3 14 15 13 2 1 12
.020 (0.51)
12 13 25
11 24
10 22 9
8 7
6 5 19
4 17 18
3 15 16
2 1 14
23
21 20
9 Contacts
.020 (0.51)
.050 (1.27) TYP.
.020 (0.51)
21 Contacts
25 Contacts
15 Contacts
17
15 16
13 14
11 12 10
27 9 43 45 44 42
8 7 41 26 40
6 5 25
4 3 23 24 38 22
2 1 21 19 20 36
.158 (4.00)
15 16 30 14 29 31 28 13 12 27 11 10 25 26 9 24 23 22 8 7 21 20 6 5 19 18 4 3 17 2 1 19 18 17 16 35 34
18
15
.183 (4.65)
13 14 33 32 12 31 30
35 11 10 29 9 8 28 27 26 25 7 6 5 4 24 23 3 2 22 21 20 1 34
33 32
31 30
29 46 28 47
51 50
49
48
39
37
.050 (1.27) .108 (2.73)
.020 (0.51)
37
31 Contacts
.020 (0.51)
36
51 Contacts 37 Contacts
All Termination Configurations .100 (2.54) x .100 (2.54) Grid Pattern, Offset .050 (1.27) Part Number By Shell Size MD*B-9PCBR* MD*B-9SCBR* MD*B-15PCBR* MD*B-15SCBR* MD*B-21PCBR* MD*B-21SCBR* MD*B-25PCBR* MD*B-25SCBR* MD*B-31PCBR* MD*B-31SCBR* MD*B-37PCBR* MD*B-37SCBR MD*B-51PCBR* MD*B-51SCBR A Max. .788 (20.01) .788 (20.01) .938 (23.82) .938 (23.82) 1.088 (27.63) 1.088 (27.63) 1.188 (30.17) 1.188 (30.17) 1.338 (33.98) 1.338 (33.98) 1.488 (37.79) 1.488 (37.79) 1.438 (36.52) 1.438 (36.52) B .005 (0.13) .565 (14.35) .565 (14.35) .715 (18.16) .715 (18.16) .865 (21.97) .865 (21.97) .965 (24.51) .965 (24.51) 1.115 (28.32) 1.115 (28.32) 1.265 (32.13) 1.265 (32.13) 1.215 (30.86) 1.215 (30.86) C Max. .292 (7.42) .375 (9.52) .442 (11.23) .525 (13.34) .592 (15.04) .675 (17.14) .692 (17.58) .775 (19.68) .842 (21.39) .925 (23.50) .994 (25.25) 1.075 (27.30) .942 (23.93) 1.026 (26.06) D Max. .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .218 (5.54) .258 (6.55) .258 (6.55) E Max. .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .134 (3.40) .218 (5.54) .177 (4.50) .258 (6.55) F Max. .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .420 (10.67) .520 (13.21) .520 (13.21) .550 (13.97) .550 (13.97) G .010 (0.25) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .250 (6.35) .300 (7.62) .300 (7.62) H .010 (0.25) .230 (5.84) .230 (5.84) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .130 (3.30) .150 (3.81) .150 (3.81)
* For jackpost locking add letter "P" or "M7". NOTE: Standard lead termination is #24 AWG, solid copper, solder or tin dipped.
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
31
Micro-D Plastic Shell - .050" Contact Spacing
MDB Coaxial Series with Screw Mounting Holes
MDB connectors with two coaxial and five MICROPINTM /MICROSOCKETTM contacts. Crimp-type coaxial contacts accommodate RG-178/U cables. A plastic insertion/extraction tool is supplied with each connector assembly having removable coaxial assembly.
MDB Coaxial
How to Order - MDB Coaxial
R RoHS COMPLIANCE SERIES SIGNAL CONTACT SPACING TOTAL CONTACT CAVITIES NUMBER OF COAXIALS COAXIAL TYPE SIGNAL CONTACT TYPE SIGNAL CONTACT LEAD TYPE SIGNAL CONTACT LEAD LENGTH MODIFICATION HARDWARE SERIES Micro-D Coaxial SIGNAL CONTACT SPACING 1 - .050 (1.27) centers TOTAL CONTACT CAVITIES. . . . . . . . . . . . . . . . . .7 . NUMBER OF COAXIALS. . . . . . . . . . . . . . . . . . . . . 2 SIGNAL CONTACT TYPE P - Pin S - Socket SIGNAL CONTACT LEAD TYPE L - Uninsulated, solid wire H - Insulated, solid or stranded S -Solder pot* COAXIAL TYPE No Letter - Coaxial assembly installed and nonremovable RO - coaxial assembly ordered serparately RA - Coaxial shipped assembled but uninstalled SIGNAL CONTACT LEAD LENGTH See Standard Wire Termination Code on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be same as wire modification. MODIFICATION Consult customer service HARDWARE No letter - No hardware standard mounting. 091 (2.31) hole diameter F - Float K - Jackscrew (standard) L - Jackscrew (low profile) P - Jackpost * Not available with removalbe coax cable type connectors RO and RA. MDB 1 -7 C2 * S H ** * K
How to Order - Coaxial Cable Assemblies
R RoHS COMPLIANCE SERIES COAXIAL CABLE CONTACT TYPE COAXIAL CABLE TYPE SERIES MD COAXIAL CABLE CC COAXIAL CABLE LENGTH CONTACT TYPE P - Pin (used with socket side connection) S - Socket (used with pin type connection) COAXIAL CABLE TYPE 1 - RG178/U Dimensions shown in inch (mm) COAXIAL CABLE LENGTH See Standard Wire Termination Codes on page 29. Coaxial cable will be RG-178U unless otherwise specified; length will be the same as wire modfication. MD CC S * ***
www.ittcannon.com
32
Micro-D Plastic Shell - .050" Contact Spacing
Dimension - MDB Coaxial Series
(See page 9 for layouts)
TWO MTG. HOLES .091 + .003 (2.31 + 0.08) DIA. _ _ A
MDB Coaxial
Plug
.190 (4.83) Max.
B
C E E1
+
D 1.000 (25.40) MAX.
+
.250 (6.35) MAX. .625 (15.88) MAX.
EXTENSION FOR RO AND RA COAXES
Receptacle
.190 (4.83) Max. TWO MTG. HOLES .091 + .003 (2.31 + 0.08) DIA. _ _
A B
C E E1
+
D 1.000 (25.40) MAX.
+
.250 (6.35) MAX. EXTENSION FOR RO AND RA COAXES .625 (15.88) MAX.
D E C B A Part Number _ + .005 (0.13) Max. Max. Max. Max. by Shell Size MDB1-7C2P* .204 (5.18) .298 (7.57) .782 (19.86) .395 (10.03) .510 (12.95) MDB1-7C2S* .185 (4.70) .279 (7.09) .782 (19.86) .375 (9.52) .602 (15.29) * Add lead type and length, see Part Number Explanation. ** Weight given is with 7 inch (177.80) insulated leads, #26 AWG silver plated copper pigtails and RG178/U coaxials.
E1 Max. .510 (12.95) .540 (13.72)
Avg. Weight** _ _ (oz) + 5% (gm.) + 5% .290 (8.30) .273 (7.80)
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
33
Micro-D Plastic Shell - .050" Contact Spacing
Mounting Hardware Views (Sizes 9-51)
This hardware supplied unassembled.
LOCK SCREW RETAINING CLIP .408 (10.36) MAX. .688 (17.48) MAX. MATING FACE
MD
#2-56 UNC-2B
.182 (4.62) MAX.
CONNECTOR SHOWN FOR REF. ONLY
.185 (4.70) MAX.
PANEL REF.
BUSHING
.500 (12.7) MAX.
Screw Lock Assembly
.093 (2.36) RECOMMENDED PANEL THICKNESS #2-56 UNC-2A
.232 (5.89) MAX.
Jackpost - (P)
.052 (1.32) TYP.
Screw Lock Assembly*
.096 .005 (2.44 0.13)DIA.
.170 (4.32) MAX.
.178 .005 (4.52 0.13)
#2-56 UNC-2B THD
.260 (6.60) MAX.
90 Angle Mounting Bracket
A B
90 Angle Mounting Bracket *NOTE: Torque value is 4.0 in/lbs max. Description Screw Lock Assembly Jackpost Kit Mounting Bracket, 90 AngleMD*1 for 9 thru 37 Shell Sizes MD*1 for 51 Shell Size Part Number 322-9500-000 320-9505-000 015-9516-000 015-9516-000 A .005 (0.13) B Max.
.100 (2.54) .122 (3.10)
.215 (5.46) .257 (6.53)
NOTES: Screw lock assembly (322-9500-000) can be used for front front mounting. Jackpost kit (320-9505-000) consists of 2 assemblies, shipped unassembled.
This hardware is factory installed.
.014 + .004 _ (0.36 + 0.10) ALLOWABLE _ DIAMETRAL FLOAT .020 (0.51) MAX. ALLOWABLE AXIAL FLOAT
MATING FACE .150 + .003 _ (3.81 + .076) _
CONNECTOR SHOWN FOR REF. ONLY
CONNECTOR SHOWN FOR REF ONLY .490 (12.45) MAX
HEX HEAD .050 (1.27) ACROSS FLATS .050 (1.27) DEEP (REF)
.155 (3.94) MAX.
.185 (4.70) MAX
.093 (2.36) REF.
.090 + .0015 _ (2.29 + 0.038)DIA _
.031 + .003 _ (0.79 + 0.08) _ MATING FACE
#2-56 UNC-2A
PART HAS A .040 (1.02) MAX AXIAL FLOAT
MATING FACE
PART HAS A .040 (1.02) MAX. AXIAL FLOAT #2-56 UNC-2A
Float Mount - (F)
Jackscrew - (K) Standard
Jackscrew - (L) Low Profile * NOTE: Torque values are as follows: Low Profile Jackscrew (L)-2.5 in/lbs Standard Jackscrew (K)-2.5 in/lbs
Shown here is a cutaway view of the float mount for the MD connector. The basic shell dimensions are the same for the float mount and the screw mounting hole configurations. View shown is for standard float mount front panel mounting. Reverse mounting is available on request.
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
34
Micro-D Plastic Shell - .050" Contact Spacing
Mounting Hardware to Military Specification (Sizes 9 - 51) PER MIL-DTL-83513/5
This hardware supplied unassembled.
#2-56 UNC-2A THREAD TYP. PLUG (REF. WITH .092 (2.34) DIA. MOUNTING HOLES #2-56 UNC-2A THREAD TYP.
MD
PLUG (REF.) WITH .092 (2.34) DIA. MOUNTING HOLES
.125 (3.18) HEX #2-56 UNC-2B Thread .190 (4.83) +_ .185 (4.70) .062 (1.57) .010 (0.25) .475 (12.06) 0.25 (0.64)
.361 (9.17) MAX.
.010 (0.25) TH'K (REF.)
.010 (0.25) TH'K (REF.)
.062 (1.57) HEX. (REF.) POTTING WELL (REF.)
POTTING WELL (REF.)
Jackscrew - (L) Low profile * Allen head Optional Head Configuration Plug and Receptacle Jackscrew - (K) High Profile Low and High Profile Slotted Head Description Slotted Head Jackscrew Assy Low Profile Slotted Head Jackscrew Assy High Profile Allen Head Jackscrew Assy Low Profile Allen Head Jackscrew Assy High Profile Jackpost Assy M83513/5 -05 -06 -02 -03 -07
RETAINING NUT .154 (3.91) HEX.
LOCK WASHER # 2-56 UNC-2A Thread
Jackpost Assembly
Mode Code M5 M6 M2 M3 M7
Part Number 320-9508-025 320-9508-027 320-9508-026 320-9508-028 320-9505-033
Jackpost Bushing (For Rear Panel Mounting)
HEX IS .135 (3.431/.115 (2.92) ACROSS FLATS .170 (4.32) .185 (4.70) #2-56 UNC 2B THD MATING FACE C A A .126 (3.20) .125 (3.18) DIA.TYP. .075 (1.91) + .005 (0.13) - .000 (0.00) R TYP.
+
+
B
.500 (12.7) .480 (12.19)
27/26TYP
#2-56 UNC 2A THD
Panel Thickness 3/32 (2.4) 1/16 (1.6) 3/64 (1.2) 1/32 (0.8)
A Dim. .092/.087 (2.34/2.21) .061/.056 (2.34/1.42) .047/.042 (1.19/1.07) .030/.025 (0.76/0.64)
Jackpost Kit Number* 320-9505-007 320-9505-006 320-9505-005 320-9505-004
Plug and Receptacle Dimensions A +.004 (0.10) -.000 (0.00) .379 ( 9.63) .529 (13.44) .679 (17.25) .779 (19.79) .929 (23.60) 1.079 (27.41) 1.029 (26.14) B C +.004 (0.10) +.005 (0.13) _ -.000 (0.00) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .219 (5.56) .261 (6.63) .565 (14.35) .715 (18.16) .865 (21.97) .965 (24.51) 1.115 (28.32) 1.265 (32.13) 1.215 (30.86)
Shell Size 9 15 21 25 31 37 51
*2 Jackposts, 2 nuts, 2 washers. NOTE: Torque value for jackpost 2.5 in/lbs
Panel Mounting Dimensions
.200 .005 (5.08 0.13) .300 .005 (7.62 0.13)
.395 .005 (10.03 0.13)
Plug and Receptacle Rear Mounted Dimensions shown in inch (mm) Specifications and dimensions subject to change
Plug and Receptacle Front Mounted
Plug Front Mounted Receptacle Rear Mounted
www.ittcannon.com
35
Micro-D Plastic Shell - .050" Contact Spacing
Panel Cutouts
D TYP. C
MD
B .015 (0.38)R. MAX.(TYP)
FULL R. (TYP.)
A
Figure 1 Front Mounting
C A .075 (1.91) + .005 (0.13) R TYP - .000 (0.00)
D
B FULL R. (TYP.) 26/27TYP
Figure 2 Rear Mounting
.450 .002 (11.43 0.05)
C .030 (0.76) TYP. D ++ ++
FULL R. (TYP.)
PANEL REF.
Figure 3 Edgeboard Mounting A + .004 (0.10) - .000 (0.00) .409 (10.39) .379 ( 9.63) .559 (14.20) .529 (13.44) .709 (18.00) .679 (17.25) .809 (20.55) .779 (19.79) .959 (24.36) .929 (23.60) 1.109 (28.17) 1.079 (27.41) 1.059 (26.90) 1.029 (26.14) B + .004 (0.10) - .000 (0.00) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .172 (4.37) .219 (5.56) .215 (5.46) .261 (6.63) C + .005 (0.13) - .000 (0.00) .570 (14.48) .570 (14.48) .570 (14.48) .720 (18.29) .720 (18.29) .720 (18.29) .870 (22.10) .870 (22.10) .870 (22.10) .970 (24.64) .970 (24.64) .970 (24.64) 1.120 (28.45) 1.120 (28.45) 1.120 (28.45) 1.270 (32.26) 1.270 (32.26) 1.270 (32.26) 1.220 (30.99) 1.220 (30.99) 1.220 (30.99) D + .005 (0.13) - .000 (0.00) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26) .089 (2.26)
Size 9
Cutout Figure 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3
15
21
25
31
37
51
NOTES: 1. Front mounting (figure 1) and rear mounting (figure 2) accommodates #2-56 screws. 2. Front mounting is preferred. However, when rear mounting is necessary. use detail on previous page. 3. Edgeboard mounting bracket (figure3) uses #2-56 screws. Dimension .450 .002 (11.43 0.05) locates the MD receptacle flush with the end of the board.
www.ittcannon.com
36
Micro-D Plastic Shell - .050" Contact Spacing
How to Order
PCB ordering information - page 30 RoHS COMPLIANCE SERIES-INSULATOR STYLE-MATERIAL CONTACT SPACING CONTACT ARRANGEMENT CONTACT TYPE TERMINATION TYPE TERMINATION CODE LOCKING HARDWARE SERIES-INSULATOR STYLE-MATERIAL MD - Clip mounting -Diallyl phthalate MDV - Clip mounting-Polyester CONTACT SPACING 1 - .050 (1.27) centers CONTACT ARRANGEMENT 9-15-21-25-31*-37-51. See page 7 CONTACT TYPE S - Socket P - Pin TERMINATION TYPE H - Insulated solid or stranded wire L - Uninsulated solid wire S - Solder pot to accept #26 AWG max. harness wire. R
MD 19 P
MD/MDV
H 001 P
TERMINATION CODE** (H) 001 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, Yellow. (H) 003 - 18", 7/34 strand, #26 AWG, MIL-W-16878/4, Type E Teflon, color coded to MIL-STD-681 System I. (L) 1 - 1/2" uninsulated solid #25 AWG gold plated copper. (L) 2 - 1" uninsulated solid #25 AWG gold plated copper.
No designator - No hardware - standard mounting .091 (2.31) hole diameter
* Not available in clip mounting. ** See page 79 and 81for additional codes.
With Clip Mounting Slots
Plug MD Glass-filled Diallyl Phthalate Plastic Insulator MDV Glass-filled Polyester Plastic Insulator
B .022 (0.56) MAX. .130 (3.30) MAX. E .093 .005 (2.36 0.13) .065 (1.65) MAX.
.204 (5.18) MAX. .375 (9.52) MAX. C
D .170 (4.32)
A
Solder Pot Receptacle
B .022 (0.56) MAX. E .093 .005 (2.36 0.13) .170 (4.32) MAX. D .210 (5.33) .065 (1.65) MAX.
.185 (4.69) MAX. .356 (9.04) MAX. C
A
Solder Pot Part Number by Shell Size MD1-9P** MD1-9S** MD1-15P** MD1-15S** MD1-21P** MD1-21S** MD1-25P** MD1-25S** MD1-37P** MD1-37S** MD1-51P** MD1-51S** MDV1-9-P** MDV1-9S** MDV1-15P** MDV1-15S** MDV1-21P** MDV1-21S** MDV1-25P** MDV1-25S** MDV1-37P** MDV1-37S** MDV1-51P** MDV1-51S** A Max. .512 (13.00) .512 (13.00) .662 (16.81) .662 (16.81) .812 (20.62) .812 (20.62) .912 (23.16) .912 (23.16) 1.212 (30.78) 1.212 (30.78) 1.162 (29.51) 1.162 (29.51) B Max. .292 (7.42) .376 (9.55) .442 (11.23) .526 (13.36) .592 (15.04) .676 (17.17) .692 (17.58) .776 (19.71) .992 (25.20) 1.076 (27.33) .942 (23.93) 1.026 (26.06) C Max. .405 (10.29) .405 (10.29) .555 (14.10) .555 (14.10) .705 (17.91) .705 (17.91) .805 (20.45) .805 (20.45) 1.105 (28.07) 1.105 (28.07) 1.055 (26.80) 1.055 (26.80) D Max. .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .170 (4.32) .213 (5.41) .213 (5.41) E Max. .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .215 (5.46) .258 (6.55) .258 (6.55) Avg. Weight*** 5% (oz.)/5% (gm.) .026 (0.73) .026 (0.73) .038 (1.10) .035 (1.00) .053 (1.50) .050 (1.40) .063 (1.80) .056 (1.60) .086 (2.45) .076 (2.15) .109 (3.10) .093 (2.65)
** Add lead type and length, see Part Number Explanation. Dimensions shown in inch (mm) Specifications and dimensions subject to change
*** Weight given is with 1/2", uninsulated solid #25 AWG gold plated copper pigtails.
www.ittcannon.com
37
Micro-D Plastic Shell - .050" Contact Spacing
Panel Mounting Hardware
Clip Mounting Illustrated is the recommended method of front mounting with metal panel mounting keys. Panel mounting keys are available with or without coupling retention clips. For front mounting, place the rear of the connector thru the panel cutout. With the mounting flange against the panel, fully insert the panel mounting keys thru the slots in the flange and thru the panel cutout. Retaining the keys in this position, bend them outward against the rear of the panel. When mating a front mounted connector with an unmounted connector, a coupling retention clip assembly may be used to securely lock the two together. Mounting screw brackets are available and may be used instead of the panel mounting keys.
Description Panel Mounting Key Mounting Key and Coupling Clip Assembly Mounting Screw Bracket Part Number 201-9100-000 294-9100-000 015-9100-000 015-5009-000 MD51428-1
MD**
Coupling Retention Clip (see Figure 2)
Mounting Screw Brackets (see Figures 1 and 3)
* Edgeboard Mounting Bracket ** Edgeboard Mounting Bracket and
Coupling Clip Assembly assembly.
Edgeboard Mounted (see Figure 4)
Panel Mounting Key
* Must be ordered separately; specify left and right hand for complete ** Must be ordered separately; assembly contains set of left and right
hand types.
Dimensions (Clip Mounting Only)
.200 .005 (5.08 0.13)
.330 .005 (8.38 0.13)
.265 .005 (6.73 0.13)
Plug and Receptacle Rear Mounted
Plug and Receptacle Front Mounted
Plug Front Mounted Receptacle Rear Mounted
Panel Cutouts
D C A B A FULL R. (TYP.) .015 (0.38)R. MAX. (TYP.) .015 (0.38)R. MAX. (TYP.) B
Figure 1 Front Mounting
C A .075 + .005 - .000 (1.91 + 0.13 _ 0.00) B FULL R. (TYP.) 26/27 TYP. .018 + .002 - .000 (0.46 + 0.05 - 0.00)
Figure 2
.005 (0.13) MAX. R. (TYP.) B
A
D
.182 + .004 - .000 (4.62 + 0.10 - 0.00) PANEL REF.
Figure 3 Rear Mounting
Figure 4 Edgeboard Mounting
1. A panel thickness of 1/8" (3.17mm) maximum is recommended for ease of tab bending when a panel mounting key & clip assembly or edgeboard mounting brackets are used. 2. Front mounting is preferred. However, when rear mounting is necessary, use figure 3 for dimensions. 3. Figure 4 is for edge board mounting bracket or edgeboard clip assembly. The .184 +_ .002 (2.67 +_ 0.05) dimension locates the MD socket insulator flush with the end of the board. 4. Screw brackets (015-9100-000) will accommodate #2-56 screws. 5. Front mounting (Figure 1) and rear mounting (Figure 3) accommodate #2-56 screws.
A B Shell Cutout + .004 (0.10) + .004 (0.10) Size Figure - .000 (0.00) - .000 (0.00) 1 .408 (10.36) .172 (4.37) 2 .408 (10.36) .172 (4.37) 9 3 .378 ( 9.60) .217 (5.51) 4 .400 (10.16) .091 (2.31) 1 .588 (14.94) .172 (4.37) 2 .588 (14.94) .172 (4.37) 15 3 .528 (13.28) .217 (5.51) 4 .550 (13.97) .091 (2.31) 1 .738 (18.75) .172 (4.37) 2 .738 (18.75) .172 (4.37) 21 3 .678 (17.27) .217 (5.51) 4 .700 (17.78) .091 (2.31) 1 .838 (21.29) .172 (4.37) 2 .838 (21.29) .172 (4.37) 25 3 .778 (19.76) .217 (5.51) 4 .800 (20.32) .091 (2.31) 1 1.138 (28.91) .172 (4.37) 2 1.138 (28.91) .172 (4.37) 37 3 1.078 (27.38) .217 (5.51) 4 1.100 (27.94) .091 (2.31) 1 1.088 (27.64) .215 (5.46) 2 1.088 (27.64) .215 (5.46) 51 3 1.028 (26.11) .260 (6.60) 4 1.050 (26.67) .091 (2.31)
C D + .004 (0.10) + .005 (0.13) - .000 (0.00) - .000 (0.00) .650 (16.51) .089 (2.26) .650 (16.51) .089 (2.26) .795 (20.19) .089 (2.26) .795 (20.19) .089 (2.26) .945 (24.00) .089 (2.26) .945 (24.00) .089 (2.26) 1.045 (26.54) .089 (2.26) 1.045 (26.54) .089 (2.26) 1.345 (34.16) .089 (2.26) 1.345 (34.16) .089 (2.26) 1.295 (32.89) .089 (2.26) 1.295 (32.89) .089 (2.26) -
Dimensions shown in inch (mm) Specifications and dimensions subject to change
www.ittcannon.com
38

▲Up To Search▲

Price & Availability of RMDVB1-9PH1K

	To Download RMDVB1-9PH1K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .